TOLL FREE: (0800)133133

Scope of UNBS Recognised Laboratories


1. What is Laboratory recognition?

Laboratory recognition is a formal acknowledgment by an authoritative third party that a laboratory is competent to provide specified technical tests or measurements following ISO/IEC 17025. UNBS operates a laboratory recognition scheme based on requirements of ISO/IEC 17025 General requirements for the competence of testing and calibration laboratories, mainly to support the product certification scheme, which requires a product testing process before a product certification decision is taken.

 

2. What is the scope of UNBS Laboratory recognition scheme? Which kind of laboratory testing services does UNBS recognize?

UNBS laboratory recognition scheme applies to both testing and calibration laboratories (private and government) in a wide range of testing and calibration for example chemical analysis labs, microbiological analysis labs, hydro biological and toxicity labs, civil engineering testing labs, electrical and electronics testing labs, mechanical testing labs, environmental testing labs, heat and temperature testing labs,Calibration laboratories covering measurement fields such as Mass and Volume, Force, Temperature, Humidity, Dimensional, Electrical RF, Flow, Fiber Optics, Viscosity, Time and frequency, wind, photometry etc.

 

3. What is the validity period granted for laboratory recognition?

The laboratory recognition is valid for a period of 3 years from the time the recognition decision is taken by the UNBS Executive Director.

 

4. The laboratory recognition once attained, is there follow up made to ascertain effective implementation? Or is it a deal closed once obtained?

Grant of recognition is followed by two surveillance audits during the 3-year recognition cycle to verify continued effective implementation and maintenance of the laboratory quality management system. Under special circumstances, surveillance audits may be increased. The first surveillance shall be conducted within 12 months from the date of the recognition decision, the second surveillance audit within 12 months from the first surveillance as per the Audit Programme CERT/SC/F07, (12:12 Rule).

 

5. If a laboratory is recognised, is it still necessary for the laboratory to acquire accreditation?

Yes, a recognised laboratory that is not yet accredited may still need to acquire accreditation. Laboratory Accreditation is a process by which an authoritative body (accreditation body) gives formal recognition of technical competence for specific tests/ measurements, based on third party assessment following ISO/IEC 17025 General requirements for the competence of testing and calibration laboratories

UNBS is not an accreditation body but rather provides Laboratory recognition services to both public and private laboratories for purposes of primarily supporting the UNBS product certification scheme. UNBS laboratory recognition prepares laboratories for accreditation since the core criteria (ISO/IEC 17025) for both recognition and accreditation is the same. Both accredited and un accredited laboratories are eligible for laboratory recognition by UNBS.

 

6. Where can we find the list of recognised laboratories and their detailed scope of recognition?

To access the list of recognised laboratories follow this link https://unbs.go.ug/e-services/certified-systems/.

and access the detailed scope of recognition for each recognised laboratory https://unbs.go.ug//content.php?src=scope-of-unbs-recognised-laboratories&pg=content

 

7. Will tests from accredited labs be recognised in the East African Community (EAC) partner states?

Yes, it is possible if Uganda National Bureau of Standards recognises the accredited laboratory through the Laboratory recognition scheme. UNBS is the national body responsible for coordinating the EAC designation of testing and calibration laboratories in Uganda. Only designated laboratories can be used for testing of products and the test results are recognized as legitimate and authentic through the East African Community Standardization, Quality Assurance, Metrology and Testing (Designation of Testing Laboratories) Regulations, 2013.

 

8. Does the Laboratory recognition scheme also apply to laboratories within factory premises?

Yes, the UNBS laboratory recognition scheme is open to all private and government laboratories in Uganda including laboratories in factory premises, manufacturing industries, research and development institutions, educational institutions etc.

 

SEE MORE FREQUENTLY ASKED QUESTIONS ABOUT UNBS LABORATORY RECOGNITION PROGRAM

DOWNLOAD UNBS LABORATORY RECOGNITION APPLICATION FORM HERE 

 

BELOW IS THE LIST OF LABORATORIES RECOGNISED BY UNBS AND THEIR SCOPES 


Attachments

CIRCODU LRS Certificate and Schedule of recognition June 2024 to January 2027  [ 671 KB ]
CHEMIPHAR (U) LIMITED - LRS Certificate and Schedule of recognition Sept 2024 to November 2026  [ 5.4 MB ]
Brookside LRS Certificate & Schedule of Recognition July 2024 to July 2027  [ 1.7 MB ]
MOVIT LRS Schedule of recognition JUNE 2024 to JUNE 2027  [ 5.5 MB ]
SMAT Technical Services LRS Certificate and schedule of recognition MAY 2024 to NOV 2026  [ 2.5 MB ]
St Micheal Food Lab Schedule of Recognition APR 2024 to JAN 2027  [ 2.5 MB ]
DDA LRS Certificate & Schedule of recognition March 2024 to March 2027 (1)  [ 1.5 MB ]
Total Energies Marketing Uganda Ltd-LRS Certificate and Schedule of recognition May 2024 to May 2027  [ 715 KB ]
UIRI - LRS Certificate & Schedule of Recognition  [ 11.5 MB ]
Tembo Steels (U) Limited - LRS Certificate & Schedule of Recognition  [ 1.4 MB ]
FREQUENTLY ASKED QUESTIONS ABOUT UNBS LABORATORY RECOGNITION SCHEME  [ 273 KB ]
JIBU LRS CERTIFICATE AND SCHEDULE OF RECOGNITION 2023 TO 2026  [ 1.9 MB ]
MINISTRY OF ENERGY PETROLEUM LAB SCOPE OF LABORATORY RECOGNITION 2022- 2025  [ 770 KB ]
CHC Laboratory Recognition Certificate and schedule of recognition 2023 to 2026  [ 1.5 MB ]
Steel n Tube LRS Certificate and Shedule of recognition 2023 to 2026  [ 1.7 MB ]
RSV Engineering LRS Certificate and Schedule of recognition 2023 to 2026  [ 619 KB ]
Biocore Enterprises - Scope of LRS recognition 2022 to 2025  [ 598 KB ]
Kansai Plascon Ltd Scope of Laboratory Recognition 2023 to 2026  [ 704 KB ]
CREEC LRS Scope of recognition 2021 to 2024  [ 740 KB ]
UCDA Scope of Recognition 2022 to 2024  [ 227 KB ]
Roofings Rolling Mills Scope of Recognition 2020 to 2023  [ 1.4 MB ]
Measurement Solutions Limited Scope of recognition for 2022 to 2025  [ 1.3 MB ]
Makerere University-Department of Food Science and Nutrition Scope of recognition 2022 to 2025  [ 2.1 MB ]
Alpha Geo Engineering Scope of recognition 2022 to 2025  [ 790 KB ]
Keane Engineering Lab Scope of recognition 2021 to 2024  [ 825 KB ]
Hariss International Limited Scope of lab recognition 2022 to 2025  [ 4.5 MB ]
Hima Cement Kasese LRS Certificate 2022 to 2025  [ 961 KB ]